Flex Safety Vacuum Cleaner VCE 33 M AC 110V with Giraffe Sander GE 5 - 444.243K

Brand:
Flex
Availability: In stock
SKU:
444243K
£995.00 (Inc Vat: £1,194.00)

  • Electronic: controlled constant speed, soft-start, overload protection and speed selection with adjuster wheel
  • Very handy, light-weight machine with optimum ease of operation. Provides comfortable and ergonomic working conditions
  • Easy guiding: by optimal balance between motor and sanding head
  • Reliable force transmission and high flexibility thanks to the flexible drive shaft from. For decades established “FLEX technology”. Thanks to this design principle the weight on the head of the Giraffe is reduced to a minimum. This facilitates handling.
  • Gimbal-mounted sanding head provides high flexibility and optimum adjustment for sanding walls and ceilings.
  • Effective dust extraction from between the brush ring and the sanding pad prevents clogging of the abrasive and promotes a dust-free working environment
  • Option of connecting the FLEX safety vacuum cleaners to the FLEX clip-system on the guide tube
  • Easy handling thanks to ergonomically shaped guide tube made of aluminium. Optionally an auxiliary handle (accessory) can be attached
  • Dust-proof on/off switch
  • Very flexible thanks to an optional 500 mm extension (accessory) for high rooms, can be attached without any tools
  • According to the assortment of sanding paper ideally suited for sanding plaster boards, solid styropor insulation slabs, preparation for painting, polishing
  • Very large areas and rooms up to 3.20 m in height can be processed thanks to the optional application of the GM 320
  • The innovative, textile transport system allows the machine and accessories to be transported effortlessly. The Giraffe does not have to be mounted and is immediately ready for use
  • Adapter plate that can be installed without using tools, for fixing L-BOXX and Tanos systainers on the head of the vacuum cleaner
  • The high-performance turbine ensures both a high suction capacity and a high vacuum. The outcome is an excellent extraction result
  • Continuous automatic flat filter cleaning ensures no loss of suction
  • The flat-fold filter with Teflon coating / nanocoating allows optimum use of the tank volume
  • With permanent socket and electronic automatic on/off switch
  • Flow sensor technology monitors the flow rate and emits a visual and audible signal to indicate any drop below the statutory minimum value of ≤ 20m/s
  • The flow rate control via the rotary switch minimises possible vacuums on the surface during intermediate and finish sanding
  • Suction diameter selector switch for adjusting the optimum flow rate
  • Suitable for wet vacuuming: with electronic liquid level control
  • Soft start stops any voltage peaks at the start and the run-on feature (15 sec. overrun) empties any remaining dust in the vacuum hose
  • Double-walled sturdy container with integrated grip recess for emptying the container easily
  • Dust-protected antistatic finish prevents electric charging of the suction hose
  • Equipped with large wheels and two swivel guide rollers made of metal
  • Separate motor air cooling duct with coarse dirt filter. Protects the turbine against the ingress of ambient air and thereby extends the service life. (Fine dust filter PES available as an accessory)
  • Simple filter change without removing the suction head
  • With hose retainer and expander for easy, quick securing of the power cable
  • With 4 clamping loops (2 on each side ) for attaching straps and a giraffe holder
  • Recommendation: When working with a filter bag turn off the automatic cleaning system. When using a disposable bag leave the system on
  • Class M safety vacuum cleaner, suitable for all dusts with OEL values ≥ 0.1 mg/m³. Specifically for mineral and timber dusts (also beech and oak)

Product data sheet

Product data sheets with accessories

Product data sheet

Product data sheets with accessories

Finance this item from as little as per Month

Click For Options

Powered By Pay4later